Page 2 of 3Previous | Next
How many square feet (Sq. Ft.) of siding do you feel contains a defect under the terms of your warranty?To determine the surface square footage of affected siding installed on
the structure, you should measure the overall length and height of the
siding in question and record the results in the spaces provided on the
diagrams below as appropriate. (For example, if the area of concern is
11 feet long and 5 feet high, then the total surface footage affected
for that side is calculated as 11 x 5 = 55 surface square feet)
If
the structure has more than four sides or the affected areas are
located in the soffit, dormer, windows, chimney, etc. state the total
additional square footage at issue and indicate its location.
-Total additional square feet and location of additional square footage:
- A copy of Proof of Purchase verifying what products were purchased or
installed showing the date of purchase or installation is required to
process your claim. This can be either a dated product sales receipt, or
other proof of purchase. We also require a copy of the property title
or deed.
-
Clear, good quality, color photographs of your home as listed below.
- Full view photo of entire structure.
- Full
view photos from each corner of the structure (similar to real estate
photos taken from a distance) properly marked with applicable direction.
(i.e. Front, Right Side, Back, Left Side).
- Close up photos that illustrate your concerns properly marked Front, Right Side, Back, and Left Side. Photos must clearly depict issue or we may require additional photos.
- Siding pieces will be requested at a later date for testing.
All the information requested must be completed to the best of your knowledge for filing this claim and returned to Mitten "along”
with items 1 through 3 listed above. The submitted photographs,
supporting documents and this completed form become the property of
Mitten Building Products.
NOTE: Your warranty coverage is "limited” and has specific "exclusions”based on when the product was installed. Please review your warranty,
prior to submitting your claim, to be sure the condition you are
experiencing is covered under the terms and conditions.
Mitten Building Products reserves the right to pursue legal action on "fraudulent claims.” I certify all the information above is true to the best of my knowledge.
Page 2 of 3Previous | Next
Page 3 of 3Previous
I would like to mail in my photographs
Mail to: Attn: Warranty Services Department, Mitten Building Products, 70 Curtis Avenue North, Paris, Ontario, N3L 3T2
Photograph Instructions
In order to evaluate your claim, a minimum of (10) photographs of the
vinyl siding and installation are required. Take photographs of each
entire side of the structure (as shown below), as well as, close ups of
the affected vinyl siding and accessories/trim. Please feel free to
include as many additional photographs as you wish to illustrate the
condition.
|
IMPORTANT:
Please use a digital camera in .jpeg format. Photos
should be e-mailed, saved onto a flash drive, or CD-R/RW (media will not
be returned). Or if printed, done so on quality photographic paper a
minimum of 3x5 in size.
If not using a digital
camera, use a 35-mm camera (or better). (Disposable cameras may be
used-but must bedeveloped prior to submitting.)
Take pictures of all the sides of your home.
Stand close enough in photos showing the problem area for the problem area to "fill up” the view finder.
For digital photos, include the view seen in the photo
in the file name. For printed photos, on the reverse side of each
photograph, please include your name, and identify the view. Use a felt
tip pen.
Indicate areas of concern on the photographs with a small arrow or asterisk (*). |
 |
A
Date Code is located on the Nailing Hem of Mitten Vinyl Siding panels,
or as a sticker on the reverse. This Date Code provides information that
will identify date and time of manufacture. This information is
required to process your claim.
Page 3 of 3Previous
